PRODUCTS
Service Tel:
+86-574-8702 9709
Water-based gloss oil (gloss coating for paper)
This product is a post-finishing agent for high-end printed matter. It gives the printed matter a good Appearance, and plays a decorative and protective role such as aesthetics, anti-fouling and moisture-proof. It is a finishing agent widely used in the printing industry at present.
As we all know, traditional gloss oil contains a large amount of volatile organic compounds (VOC), which not only pollutes the atmosphere, but also seriously affects the health of operators, and cannot be used for glazing of food packaging. In the modern age with increasing awareness of environmental protection, water-based gloss oil with water as the medium has gradually highlighted its importance. It is the trend of the modern world to replace "oily" with "water-based".
Compared with oily gloss oil, this product has the characteristics of environmental friendliness, is safer for operators, has no concerns about inflammability and explosion, and is suitable for glazing of food packaging products. And like oily gloss oil with good gloss and quick drying characteristics.
Product Image:
Product Quality Index
Item |
Index |
Appearance |
Milky white viscous liquid |
Solid content, % |
38-39 |
Viscosity mPa s |
200±50 |
pH |
7-9 |
Instructions
It can be directly brushed, scraped and sprayed on the surface of the paper, or it can be diluted with water to finish the surface of the paper.
Features
No VOC release, environmentally friendly;
Safe, no flammable, explosive worries;
High adhesion, high wear resistance, no cracking;
Suitable for food packaging glazing, FDA approved;
High resistance to chemical solvents.
Precautions
Do not dilute with organic solvents such as alcohol. If you need to lower the viscosity, you can mix it with an appropriate amount of water.
After taking this product, the container and the tools that come into contact with this product should be washed with water immediately, so as to avoid adhesion and affect subsequent use.
If the viscosity of this product is found to be too low, it can be adjusted with a small amount of ammonia water.
After taking this product, the container should be closed to avoid deterioration due to exposure to air.
Hands, other parts of the body and clothing and other items should be washed immediately with water when they come into contact with the product.
Tel: 139 5781 7262 0574-8702 9707 137 7700 2416 159 5884 9949
Ningbo Huizhen New Material Co., Ltd.